|
SCSI HPDB50 (MicroD50) Differential External Terminator
SCSI HPDB50 (MicroD50) male differential external terminator. This terminator is used for SCSI systems that used the Differential SCSI bus, also know as High Voltage Differential. (Connector: HPDB50 Male) |
CC397D
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI HPDB50 (MicroD50) Passive External Terminator
SCSI HPDB50 (MicroD50) male passive external terminator. Passive terminator sits on the bus to minimize reflections at the end of the cable and simply provides an impedance that’s close to the impedance of the cable. This terminator can also be used for internal applications. (Connector: HPDB50 Male) |
CC397-M
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Cen50 Male Passive Pass-Thru External Terminator
SCSI Centronics50 male/female passive pass-thru external terminator. Pass-Thru terminators allow you to terminate a SCSI chain that has no connector for termination. It should be placed just before the last SCSI device. This terminator can also be used for internal applications. (Connectors: Cen50 Male/Female) |
CC538
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Cen50 Male Active External Terminator
SCSI Centronics50 male active external terminator. Active terminator prevents signal reflections to provide data integrity and works to control the impedance at the end of the bus by using a voltage regulator, not just the power supplied by the SCSI controller. It is more reliable than passive termination for high speed devices and long distance applications. This terminator can also be used for internal applications. (Connector: Cen50 Male) |
CC538A
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Cen50 Male Differential External Terminator
SCSI Centronics50 male differential external terminator. This terminator is use only for SCSI systems that used the Differential SCSI bus, also know as High Voltage Differential. (Connector: Cen50 Male) |
CC538D
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Cen50 Male Passive External Terminator
SCSI Centronics50 male passive external terminator. Passive terminator sits on the bus to minimize reflections at the end of the cable and simply provides an impedance that’s close to the impedance of the cable. This terminator can also be used for internal applications. (Connector: Cen50 Male) |
CC538M
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Cen50 Male FPT External Terminator with Built-in Tester
SCSI Centronics50 male forced perfect terminator (FPT). FPT terminator is recommended over the passive and active type for high-speed devices and long distance applications. It goes beyond stabilizing the power applied to the terminator by altering its impedance to actively compensate for variations among many different cables and devices by means of diode switching and biasing. It has built-in troubleshooting LEDs. (Connector: Cen50 Male) |
CC538T
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Ultra320 VHDCen68 (.8mm VHDCI) LVD/SE/Differential External Terminator
SCSI VHDCen68 (68Pin .8mm VHDCI) male external terminator for UltraSCSI LVD/SE & Differential (HVD) devices. This terminator supports the latest Ultra320 devices. (Connector: VHDCen68 Male) |
CC623E-M3
STATUS: REG SKU
Request
For Quote |
|
|
|
UltraSCSI HPDB68 (MicroD68) Active External Terminator
UltraSCSI HPDB68 (MicroD68) male active external terminator. Active terminator prevents signal reflections to provide data integrity and works to control the impedance at the end of the bus by using a voltage regulator, not just the power supplied by the SCSI controller. It is more reliable than passive termination for high speed devices and long distance applications. (Connector: HPDB68 Male) |
CC638A
STATUS: REG SKU
Request
For Quote |
|
|
|
UltraSCSI HPDB68 (MicroD68) Passive External Terminator
UltraSCSI HPDB68 (MicroD68) male passive external terminator. Passive terminator sits on the bus to minimize reflections at the end of the cable and simply provides an impedance that’s close to the impedance of the cable. (Connector: HPDB68 Male) |
CC638P
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI HPDB50 (MicroD50) to HPDB68 (MicroD68) External Adaptor with High Byte Termination
Connects HPDB50 (MicroD50) drive to HPDB68 (MicroD68) SCSI chain. It has built-in High Byte Active Termination to terminate the unused 18pins and prevent reflections. The HPDB50 device must be terminated at the end of the chain. (Connectors: HPDB50 Female to HPDB68 Male) |
CC639AT
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Ultra320 HPDB68 LVD/SE External Terminator
SCSI HPDB68 (MicroD68) male external terminator for UltraSCSI LVD/SE devices. This terminator supports the latest Ultra320 devices. (Connector: HPDB68 Male) |
CC688E-M3
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI Ultra320 HPDB68 LVD/SE Pass-Thru External Terminator
SCSI HPDB68 (MicroD68) male to female external pass-thru terminator for UltraSCSI LVD/SE devices. Pass-Thru terminators allow you to terminate a SCSI chain that has no connector for termination. It should be placed just before the last SCSI device. This terminator supports the latest Ultra320 devices. (Connectors: HPDB68 Male/Female) |
CC688E-MF3
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI IDC50 to HPDB68 (MicroD68) Adaptor with High Byte Active Termination
This adaptor allows you to convert a HPDB68 (MicroD68) female internal drive for an IDC50 SCSI chain, or vice versa. It has built-in High Byte Active Termination to terminate the unused 18pins and prevent reflections. (Connectors: HPDB68 Male to IDC50 Male) |
CC692PT
STATUS: REG SKU
Request
For Quote |
|
|
|
SCSI IDC50 Female to HPDB68 (MicroD68) Adaptor with High Byte Active Termination
This adaptor converts a HPDB68 (MicroD68) drive for an IDC50 SCSI chain, or vice versa. It has built-in High Byte Active Termination to terminate the unused 18pins and prevent reflections. Supports HDV/SE applications. (Connectors: HPDB68 Female to IDC50 Female) |
CC692SFT
STATUS: REG SKU
Request
For Quote |
|
|
| |
